CH
EN
| Serial number | Project | Detail |
| 1 | NG cutting mode | Communication with electric injection automatic feeder equipment electric injection automatic feeder feeding. |
| 2 | Size（mm） | Refer to the actual device layout diagram |
| 3 | Communication mode |
A.Communication mode such as IO or network port; B.Communication protocol |
| 4 | Weight（kg） | 1000Kg within |
| 5 | Voltage(v） | 380v |
| 6 | Power(kw) | 8KW（monorail） |
| 7 | Air source requirement(MPa) | 0.6～0.8；φ16 air tube |
| 8 | Sets in use | ≥98% |
| 9 | Fragmentation rate | ≤0.03%(Class A film source and eliminate human and other abnormal factors) |
| 10 | Production capacity | ≥7200pc/h |
| 11 | Compatible with battery size | ★Hardware customization（Default support 156~230mm） |
| 12 | Compatible with battery type | By default only single crystals are supported； |
| 13 | Work environment | Temperature：﹢15℃～﹢40℃，Humidity：10％～75％ |
CH